Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to display the configuration of an option 11c

Status
Not open for further replies.
tejas1

tejas1

Technical User
Joined
Aug 29, 2001
Messages
13
I have an option 11c and need to list the configuration. Is there a command that will list all the cards in the PBX?
 
Sort by date Sort by votes
Load Program 22 and then
req prt
type cfn

It's all
 
Upvote 0 Downvote
LD22 - PRT - CFN will tell you what loops have SDI/PRI/DTI/MISP type cards assigne to whatever loops. Use LD32 or 10 to stat each loop & you will identify FALC's/ DGTL/COT/DID/ E&m etc. Superloop is for MMail, if installed.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

htroberts
  • Locked
  • Question Question
how to get into top compartment of 11c cabinet?
Replies
7
Views
930
htroberts
htroberts
ATMFIRE
  • Locked
  • Question Question
OPTION 11C keys actiation
Replies
3
Views
787
Firebird Scrambler
Firebird Scrambler
nihaalrai236
  • Locked
  • Question Question
Nortel Option 11C RLS 25 asking for "MODL"
Replies
4
Views
1K
Firebird Scrambler
Firebird Scrambler
Ozphonebloke
  • Locked
  • Question Question
Option 11C PSU cct diagram or voltage pinout
Replies
1
Views
733
Ozphonebloke
Ozphonebloke
LidLock Technologies
  • Locked
  • Solved
Option 11 SDI Cabling
Replies
4
Views
782
bignose21
bignose21

Part and Inventory Search

Sponsor

Back
Top