Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to copy swap DN with another phone with different TYPE?

Status
Not open for further replies.

nortelhead

Technical User
Joined
Feb 7, 2009
Messages
4
Location
CA
Hi Folks,

I have 2 phones, example:

ext. 1111, phone type 2008, TN 1 1
ext. 2222, phone type 3094, TN 2 2

How to I swap the DNs without changing their TNs? Result shoul be:

ext. 1111, phone type 3094, TN 1 1
ext. 2222, phone type 2008, TN 2 2

Thanks a million for any reply.

 
The easiest way is to go into LD 11 and..

REQ CHG
TYPE 2008
TN 1 1
ECHG YES
ITEM KEY 0 SCR 2222 (Assuming that key 0 has the DN against it!)
If MARP comes up, add in YES and press return a few time until you get the REQ prompt. Repeat this again for the other TN i.e.

REQ CHG
TYPE 3804
TN 2 2
ECHG YES
ITEM KEY 0 SCR 1111 (Assuming that key 0 has the DN against it!)

That should do the trick!.

All the best

Firebird Scrambler
Meridian Programmer in the UK

If it's working, then leave it alone!.
 
If you get conflict issues then just NUL the KEY 0's on both TN's and then re-assign those DN's on KEY 0's SCR XXXX
you may need to change other profile settings though

Swings and roundabouts really

Cheers!!

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top