How to copy a clone volume to a destination volume

[sdohn]

In my L180 one Tape is broken.
The good news is I have a clone volume.
How can I copy the clone to a valid destination volume,
that can be used by the networker

 

[605]

This is not necessary. Just mark the save sets residing on the original volume as "suspect".

You do not even need to do this as you may recover a save set directly from the command line like this:

recover -S ssid/cloneid

 

[sdohn]

>This is not necessary. Just mark the save sets residing on >the original volume as "suspect".

>You do not even need to do this as you may recover a save >set directly from the command line like this:

> recover -S ssid/cloneid

Thanks, but what I want is to copy the clone tape information to a second tape which has the same VOLUME and ssid information as the original tape which is broken.

I've found no information how to do this.
Can someone give me advice

 

[605]

Such is impossible:

- You can not clone to the original pool - the save set must go to a media of a clone pool.

- Of course you may clone a cloned tape or save set another time. It will have the SSID but another CLONEID and of course another VOLUMEID.

And it does not matter as the media db has to take care about these changes.