Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
how to convert XML to Autocad
- Thread starter reujken
- Start date
TCARPENTER
Programmer
Hi reujken,
Provide you have 2002 or higher and the XML file you have is DesignXML format, the easiest way is to just use the insert command, select the browse button, and then in the file types dropdown near the bottom of the dialog box, change the type to DesignXML (*.xml) and the rest is just like inserting a regular block/drawing.
HTH
Todd
Provide you have 2002 or higher and the XML file you have is DesignXML format, the easiest way is to just use the insert command, select the browse button, and then in the file types dropdown near the bottom of the dialog box, change the type to DesignXML (*.xml) and the rest is just like inserting a regular block/drawing.
HTH
Todd
- Status