How to configure g430/S 8300D as LSP in remote location.

[arunknair]

Dear Members,

I have a Avaya CM installation where the scenario is like this,

Two sites, one is MAIN and one in REMOTE, sites connected via WAN

(MAIN SITE) ---- REMOTE SITE
S8300D G450 g/w ---- S8300D G 430 g/w
120 IP Phones ---- 15 ip phones
MM711 ---- MM711



I would like to know a few things,

1) Which template should I install on the MAIN S8300D and the remote S8300D?
2) Which document should I follow to configure and enable the LSP mode?
3) The customer wants redundancy , if one CM fails the other CM should take the charge

Is there a step by step guide available or can some one give me a link to the documents which i need to refer.

 

[montyzummer]

ermmmm... cmonly_embedded template on ICC.

cmsurv_embedded on lSP.

Documents all on the support site but start here and look for lsp

http://downloads.avaya.com/css/P8/documents/100156867

APSS (SME)
ACSS (SME)