Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
how to configure failover pix 515E via ASDM
- Thread starter mosaur
- Start date
Supergrrover
IS-IT--Management
Never done it by the ASDM but here is the config via CLI
Brent
Systems Engineer / Consultant
CCNP, CCSP
Brent
Systems Engineer / Consultant
CCNP, CCSP
Well I do not know the version that you are running, the best practice is to use the CLI however you can use the following link asa reference:
that is for asdm 5.2, prior to configuring failover make sure you have the required licenses
that is for asdm 5.2, prior to configuring failover make sure you have the required licenses
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question