Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

how to communicate 79## with the PSTN?

Status
Not open for further replies.

Guest_imported

New member
Jan 1, 1970
0
how can i link the ip/phone with the PSTN? I can talk with the pot which is in the LAN but i want to communicate with some pots which is not in our LAN. What should i do ?
THANKS
 
Mike

You need to have a 2 port FXO card in your cisco router. I am using a 3600 series router but a 2600 or a vg200 will work as well. After you install the FXO card plug your phone line into one of the ports. Next configure the router for MGCP support. Cisco has a page on how to do the config

Next configure the callmanager for a gateway and point it to the router you are using with the fxo card.

Next make sure the router can route back to the phone by pinging the phone from the router you are using for the gateway.

Next create a dial plan for the out of office calls using the call manager wizard.

Next Assign the phones to the search space for the outside dialing plan.


If you have any more questions let me know.

Godd luck
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top