Dec 20, 2007 #1 blcabling Technical User Joined May 20, 2007 Messages 12 Location US I would like to have lines appear/ring on the phones. But the trunk type shows as VoIP. How can I change this? Thanks!
I would like to have lines appear/ring on the phones. But the trunk type shows as VoIP. How can I change this? Thanks!
Dec 20, 2007 #2 CTCINY Programmer Joined Feb 25, 2005 Messages 664 Location US Analog trunk ports on the BCM 50 start at 061-064 on the main cabinet. What doesn't kill you only makes you stronger. Upvote 0 Downvote
Analog trunk ports on the BCM 50 start at 061-064 on the main cabinet. What doesn't kill you only makes you stronger.
Dec 20, 2007 Thread starter #3 blcabling Technical User Joined May 20, 2007 Messages 12 Location US Thanks for the info! Upvote 0 Downvote
Dec 21, 2007 #4 cook1082 Vendor Joined Mar 3, 2006 Messages 3,596 Location US You would not assign the VOIP trunks to a set it would be a target line and in set programing line access change to ap & ring. Upvote 0 Downvote
You would not assign the VOIP trunks to a set it would be a target line and in set programing line access change to ap & ring.