marvin51796
MIS
can someone please tell me how to set up sybase to allow more than 10 devno/number of devices Please
thnxs
thnxs
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
how to add more device numbers 1
- Thread starter marvin51796
- Start date
- Status
-
1
- #2
hello,
try this...
sp_configure, devices, [value you need]
go
then bounce the server...
please note that if you are running disk init... 0 is for the master device and the max value you can use for the vdevno parameter is one less than the value devices...
hth,
q.
try this...
sp_configure, devices, [value you need]
go
then bounce the server...
please note that if you are running disk init... 0 is for the master device and the max value you can use for the vdevno parameter is one less than the value devices...
hth,
q.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question