Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gmmastros on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How To Add A Subnet For AnyConnect

Status
Not open for further replies.
Apr 18, 2003
250
US
I am working with an ASA 5520 and it looks like the previous regime created a second subnet for servers but users who connect to the network via AnyConnect cannot to the second subnet.

Is there a simple way to add this second subnet via ASDM?
 
yeah ...

going off memory here :
Client based VPN --> Group policies --> the GPO they are matching --> one of the options is SPLIT Tunnel --> split tunnel list below --> opens a section for ACL to be selected or added --> either add the entry to the ACL or create a new ACL ...



disconnect/ reconnect the VPN and do a route print (assuming windows) ...

if thisis not enough once i get to work tomorrow (12 hours) i can find the exact screen shots for you ..


We must go always forward, not backward
always up, not down and always twirling twirling towards infinity.
 
I did that (the subnet is called inside network /24, which I think is because one of the nics is using an ip on that subnet) but I still can't get to it.
Is there a window in ASDM that shows me what ACL is tied to VPN?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top