How to add a beeline in XXXX ext?

[haiqi]

How to add a beeline in XXXX ext?

chang a button? and i will new a trunk to this button?

 

[orypecos]

hmmmm.... what is a beeline?

David

P.S. A message to all,if you want to get the best response to a question, please read FAQ222-2244 first. Also give the type & version of your voice mail & pbx system & preview your post to make sure it is complete & understandable. Be aware that if u don't answer a question, I usually will not continue to help u.

 

[4merAvaya]

If you are referring to 'hotline', where you just pick up the phone and it dials a pre-defined number, you have to give the calling station an abbreviated dial list with the number that you want it to dial as one of the entries. The station type must be 2500. On page 3 of the station form you assign the abbreviated dial entry in the hotline section.

Kevin

 

[haiqi]

yes,a hotline in 6416 or 6424,what can i do?

 

[4merAvaya]

For digital sets you can assign an autodial button.

Kevin

 

[avayafreakje]

hotline is not possible on dcp or ip stations

 

[orypecos]

I thought I remembered that analog stations in later pbx versions can be bridged on a digital phone, but don't have to have their own extension? If so, if they had a hotline destination then would the digital phone dial to the hotline destination when picked up?

David

P.S. A message to all,if you want to get the best response to a question, please read FAQ222-2244 first. Also give the type & version of your voice mail & pbx system & preview your post to make sure it is complete & understandable. Be aware that if u don't answer a question, I usually will not continue to help u.

 

[haiqi]

thanks, now i change a button in 6416, button writing *88,*88 is a trunk TAC,that's a hotline! but when i press button display *88,i indisposition display *88.

what can i do?