How print in LPT1 and LPT2 in same datawindow 1

[msminformatica]

I can't set different port to same datawindow.
Thanks in advance.
Fede.

 

[password99]

Could you elaborate?

 

[msminformatica]

Well, my problems is this...
I´ve two ports in the same pc, LPT1 and LPT2 and I´ve two printers, one on the LPT1 port and another on the LPT2 port, I´ld like print in the LPT1 or LPT2 port when I need depend the transaction... but I don´t know how I can send the print job to LPT1 or LPT2.
Thanks in advance,
Fdrco.
msminformatica.

 

[OlanKnight]

Why not just change the name of your printers? If you need to print to device1 then set that as your printer.


From the PRINTER Datawindow Object property:

The printer you select for a DataWindow does not affect the PowerBuilder default printer or the system default printer. To specify a network-connected printer, you must use a fully specified network printer name:

dw_1.Object.DataWindow.Printer = "\\net-print\pr-6"

Non-networked printer:
dw_1.Modify ('DataWindow.Printer="My LaserJet 3" ')


Olan