foreverlearning83
Programmer
How do you program a door-phone on an NEC SL1100 in PCPro or WebPro?
Thanks All!!
Thanks All!!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How do you program a doorphone in PCPro or WebPro for an NEC SL1100
- Thread starter foreverlearning83
- Start date
- Status
smithy704
Programmer
- Dec 20, 2013
- 12
must be port 3 or 4 on the SLT port on the system
wire a single pair from there to the NEC Door station you will need to supply
in 11-02 give the SLT port an extension number
32-02, assign what phones are to ring when door station is pushed
job done
wire a single pair from there to the NEC Door station you will need to supply
in 11-02 give the SLT port an extension number
32-02, assign what phones are to ring when door station is pushed
job done
- Status
Similar threads