Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How do you BACK UP an old 8x24 DR5 ? 1

Status
Not open for further replies.

randyvegas

IS-IT--Management
Joined
Nov 24, 2007
Messages
47
Location
US
With help from folks here, I have gotten my FastRad working with Norstar manager 3.7 WOO HOO! but I have a couple questions..

Is it supposed to be VERY SLOW ? I'm connected at 19,200 but it takes about 2-3 minutes after login to populate the screen, and every selection takes a good amount of time... is this normal, or is somehting wrong ?

Also, when I connect it says that the system is not backed up, BUT I don't see any options TO BACK UP the system ???

The closest I saw was under the remote tools, the backup / restore util, but when I try to run THAT it says " system is DR5, cannot use this utility " (or something to that effect)..

Thanks for any assistance!

-randy
 
Dr5 is not able to back up. your system has to be running 2.0 or better for the NRU to backup
 
You can back up a DR5 with Norstar Manager 3.5 or 3.7. I've found 3.7 a better tool.
 
Okay, please indulge my ignorance :)


When you say system s/w is the issue, what do you mean?

I thought "DR5" was the sys software / level ???

or does that refer to a version of h/w ?

Bottom line... is there really NO WAY to back it up ? ??

thanks again!

 
It's amazing how much MISinformation is out there, but as usual Brian comes through with the RIGHT answer!

I definately owe you a beer next time ur in Vegas.

Thanks again.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top