How do I open the SSH (22) port? 2

[RobNotKnowing]

I have to point one of our vendors (100.101.102.x) to our server on our local network 10.11.20.10 through port ssh 22 tcp. does anyone know how to do this?

Thanks

 

[sla07]

if its a pix 501 (this is the only pix ive worked with so bare with me)...this is how its done...

create the ACL rule:

access-list inbound permit tcp 100.101.102.x/32 host pub.lic.ip.here eq ssh

create the static map:

static (inside,outside) tcp interface ssh 10.11.20.10 ssh netmask 255.255.255.255 0 0


create the access-group:

access-group inbound in interface outside



correct me if I am wrong anyone?

 

[RobNotKnowing]

It is a pix 515e version 6.3(3)
sorry

 

[RobNotKnowing]

Maybe it is port forwarding.

I need to have the internal server (10.11.20.10) to be able to be accessed by an outside vendor 100.101.102.x

 

[boymarty24]

it doesnt matter if its a 501 or 515 in this case.

Just follow sla07´s config and you will be home safe =)

You need to create a mapping from one of your public ip to your local server, since you have a private address.
Then you create the access list and bind it to a interface.
Just like sla wrote

To get the stuff on the road do a clear xlate. When you are dealing with address translation you need to clear the xlate.

 

[RobNotKnowing]

Thanks...I will try that.