How do I block Caller ID outpulsing by Station

[Sirrono]

I have been out of this too long. I cannot remember where to set the outpulsed digits for individual DIDs. I have a G3si Rel.12 and am a bit rusty with my admin. Please help.

SirRono

 

[GMinTX]

Assign a cpn-blk key,

 

[Sirrono]

Thanks GMinTX, this is the current quick fix I employed but I am looking for something more hands off for the user. Do you know of a place in the SW to program what numbers are being outpulsed?

SirRono

 

[SF0751]

If you have ISDN trunks you can use cha isdn pub. Let me know if you need more details.

Susan
_{You have all the characteristics of a popular politician: a horrible voice, bad breeding, and a vulgar manner.}
^{Aristophanes, 424 B.C.
Lex clavatoris designati rescindenda est.}

 

[lopes1211]

Page 2 of the station form has "send CPN". If the field is blank, it follows the system wide defaults, or you can change it to yes or no.

-CL

 

[abacks]

On ISDN trunks you can control the outbound information on the screen

change isdn public-unknown-numbering

For more information refer to your Administrator's Guide Chapter 18 - screen reference

Andy Backs
MVD Communications
andy.backs@mvdcommunications.com

 

[GMinTX]

Not sure if this will help but on the trunk configuration there is an option to "suppress # outplulse" .

I have tried to find something that tell more about it but comming up empty.