Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Shaun E on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How connect/disconnect to network from MS-DOS ?
- Thread starter Israel
- Start date
You will have to get specific DOS LAN drivers for your network card to start off with. It should come with some documentation on where to put the start up files it needs. You can also search the web for some DOS startup disks that are network ready. Configuration is easy after that, sometimes it just takes a text file to pull the configuration data (ip address, gateway, ect...) its been awhile since i had to do that though, im alittle rusty.
HI!
Search the MS KB articles (support.microsoft.com),
they have some articles about troubleshooting Windows 98 Shutdown.
Bye
Yizhar
Yizhar Hurwitz
Search the MS KB articles (support.microsoft.com),
they have some articles about troubleshooting Windows 98 Shutdown.
Bye
Yizhar
Yizhar Hurwitz
- Status
Similar threads
- Locked
- Question
- Locked
- Question