zonezone219
Technical User
please help me config it.
i try *73*pincode# but still make a call.
thanks all member on site
i try *73*pincode# but still make a call.
thanks all member on site
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How can config authority code for extension?
- Thread starter zonezone219
- Start date
- Status
Hitechbuzz
Technical User
Hi timezone 219
It sounds like you are trying to set the code from the phone.
I would set the code using "AUCOI:AUTH=xxxx,CILCOD=extn,CSP=0,CHECK=yes (send)
By the way what system is this for?
Cheers Brian
To see is to know To Know is to see
It sounds like you are trying to set the code from the phone.
I would set the code using "AUCOI:AUTH=xxxx,CILCOD=extn,CSP=0,CHECK=yes (send)
By the way what system is this for?
Cheers Brian
To see is to know To Know is to see
- Thread starter
- #3
zonezone219
Technical User
DEAR MR Hitechbuzz
THIS IS MY SYSTEM CXP1010101/4/TSWSP05/R6A
THANKS YOUR SUPPORT
THIS IS MY SYSTEM CXP1010101/4/TSWSP05/R6A
THANKS YOUR SUPPORT
- Thread starter
- #4
zonezone219
Technical User
CAN YOU HELP ME SETTING *73*PINCODE# LOCK PHONE=ABB 1 AND #73*PINCODE#=ABB 2?
BECAUSE WHEN ACTIVE CODE PUT TOO MANY DIGIT I'M AFRAID USER PUT IN NOT CORRECT.
THANKS AND BEST REGARD
BECAUSE WHEN ACTIVE CODE PUT TOO MANY DIGIT I'M AFRAID USER PUT IN NOT CORRECT.
THANKS AND BEST REGARD
- Status
Similar threads
- Locked
- Question