Hotline iPECS

[Agent0007]

Hello!

I have a problem regarding the hotline function on eMG80

if a station is hotline (for example station 100)

100 is in hotline mode, is there any number code that I can dial in the keypad to be able to call Internal numbers?



thank you!

 

[nfcphoneman]

If x100 is a digital phone, you can simply dial the extension number without picking up the handset.

http://www.jacksonvilletelephone.com

Jacksonville Florida Telephone Systems

 

[Agent0007]

thank you for the reply,

it is an analog phone. is there any way?

 

[nfcphoneman]

Not that I'm aware of off the top of my head. Have you tried a flash after you pick up?

http://www.jacksonvilletelephone.com

Jacksonville Florida Telephone Systems

 

[Thermus]

You can set the extn to warm line in PGM 111, Routing attributes 7. Or from phone PGM 113/7.

Then set the prime line timer in System timers/37, or from phone PGM 182/6. Default is 5 seconds.

This does allow anyone to call out before the timer expires depending on the length of timer.

This would seem the only way around it.

 

[Agent0007]

Thank you very much for the response!