HMC support

[madra]

does anybody know where to find when HMC versions are out of support ? (as per AIX TLs etc..)

Plus does the same type of information exist for C Compilers and other such apps ?

thanks


madra

 

[MoreFeo]

What HMC version?
For POWER4, POWER5 or POWER6?

For POWER5 and POWER6 I've found this links:
POWER5 (595 and 590 excluded):

http://www14.software.ibm.com/webapp/set2/sas/f/power5cm3/supportedtable1.html

POWER5 (including 595 and 590):

http://www14.software.ibm.com/webapp/set2/sas/f/power5cm3/supportedtable2.html

For POWER5 HMC v5R2 and lower are out of support, HMC v6R1 is with reduced support, and above it has full support.

POWER6 (entry-level):

http://www14.software.ibm.com/webapp/set2/sas/f/power5cm3/eltablep6.html

POWER6 (mid-range):

http://www14.software.ibm.com/webapp/set2/sas/f/power5cm3/emtablep6.html

POWER6 (high-end):

http://www14.software.ibm.com/webapp/set2/sas/f/power5cm3/ehtablep6.html

For POWER6 HMC v7R3.2 and v7R3.1 have reduced support, and above it has full support.

For POWER4 I've found this:

http://www14.software.ibm.com/webapp/set2/sas/f/hmc/power4.html

Effective August 31, 2006, the System p POWER4 Hardware Management Console (HMC) Software Licensed Program Product (LPP) Versions 3.1.0 through 3.2.6 (PID 5639-N47) have been non-supported due to the product's end-of-service date.
...
However, no service support or subscriptions will be provided on the HMC versions 3.1 through 3.2. HMC 3.1 and 3.2 customers will be asked to upgrade to HMC V3.3 to receive continued support under their valid HMC SWMA.

So I think only HMC v3R3 has support (v3R3.5 and v3R3.7).