lastofthemohigans
IS-IT--Management
- Nov 2, 2005
- 4
We have a server that jumps to 100% utilization in the middle of the day. After a quick reboot it is back to normal. Anyone with the same encounters.
Thanks
Thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
High Utilization Novell NetWare 5.1
- Thread starter lastofthemohigans
- Start date
- Status
marvhuffaker
MIS
Don't reboot..Check in MONITOR to find out what process is spiking like that, then troubleshoot further. Very likely that it is virus or backup software.
If you reboot as soon as you ahve the problem, it will be very difficult to determine the cause.
Marvin Huffaker, MCNE
If you reboot as soon as you ahve the problem, it will be very difficult to determine the cause.
Marvin Huffaker, MCNE
- Thread starter
- #3
lastofthemohigans
IS-IT--Management
- Nov 2, 2005
- 4
In monitor we have the threads server01 - 09 are the threads how do we turn that info to english terms
thanks for your kind response
thanks for your kind response
- Thread starter
- #4
lastofthemohigans
IS-IT--Management
- Nov 2, 2005
- 4
DOS Client cause the problem. After shutting of each machine we found a DOS 6.22 with Client 32 requester causes High Utilization on NetWare 5.1 SP8. Problem is resolved thanks
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question