High Speed USB

[NorstarOption]

I have a PCG-z505lsk that I know it has high speed usb port. But everytime I have to plug in a high speed device ex. ipod. I will get this message stating I have a high speed device connected to non high speed port. How do I fix this?

 

[Glenn9999]

Is the port enabled to be USB 2.0? Are the drivers loaded so the system can recognize USB 2.0 ports (do the ports show up in the System Device List)? I know for my system I have to load USB 2.0 drivers to be able to get high-speed use of the ports.

Do you have anything else that's USB 2.0 capable to try in this port?

 

[xwb]

THere is normally a driver of some sort that you have to load in to tell the system that it is USB2 otherwise it just assumes USB1.1 by default.

 

[Rick998]

Sorry but the Sony support site shows the PCG-Z505 series, including the PCG-Z505LSK, has only USB 1.0 ports.

In the Sony eSupport Knowledge Base have a look at Knowledge Article C211592 to see a list of USB support speeds by model at

http://www.iq.sony.com/srvs/autoresponsev4.asp?id=211592

for more info.

Hope this info helps...

 

[NorstarOption]

I wonder if there's anything I can buy to make it high speed 2.0.

 

[IllogicallyLogical]

If your laptop has a cardbus or PCMCIA slot, you could get a usb 2.0 adapter.

Joey
A+, MCP