Hide outgoing phone number on LDK-24 1

[atiemstra]

Hello all,

This is my first post on the forum.
Since short I manage an LDK-24.
This phonesystem is located in an office where a part is rented by another company. When the persons call from that company the reciever gets the main number shown. So when they call back to the number they received our reception gets the call for the other company.

I would like to hide the outgoing phone number to keep this from happening. Or that in stead of the main number is shown the number of the calling number is shown at the receiving person.

I tried to figure it out with the programming manual but i can't find it.

Please if someone knows,

Thanks in advance,

André

 

[doktor]

Oooh...

It is very good hidden.
Check PGM114 BTN11 ISDN CLI Station Number
or
PGM114 BTN17 CLI Type -> Set to long
PGM114 BTN18 Long STA CLI -> Write the number to show to A-party.
This number can max. be 12 digits, and has to be within the number range of your DDI numbers.

///doktor

 

[atiemstra]

Thanks very much doktor.
I am going to use the second option.

You really made my week.

Thanks again,

André

 

[doktor]

Excellent...

///doktor