Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

HFA AND SIP IP PHONES 1

Status
Not open for further replies.

melhabba

Technical User
Mar 1, 2017
68
0
6
LY
HI
please can any one tell me information ( in detail ) about these commands ( Hipath4000 V5 )
ADD-BFDAT:1,SIP&HG3530&HG3550,BCHL60&BCHL120,;
CHA-BFDAT:CONT,1,SIP,10,,1;
CHA-BFDAT:CONT,1,HG3530,200,,10;
CHA-BFDAT:CONT,1,HG3550,1,3,;
and can I encease ( extend ) sip phones in hipath pbx?
thank you
 
Hi,
ADD-BFDAT:1,SIP&HG3530&HG3550,BCHL60&BCHL120,; //Define provisioning SIP ,HFA,IP trunk function
CHA-BFDAT:CONT,1,SIP,10,,1; // allow to creat max 10 SIP phone But at the same time only 1 SIP can conv
CHA-BFDAT:CONT,1,HG3530,200,,10; //allow to creat max 200 HFA phone But at the same time only 1o HFA can conv
CHA-BFDAT:CONT,1,HG3550,1,3,;// allow to creat 30 B channel IP Trunks

you can encease ( extend ) sip phones in hipath pbx
 
Thank you wabe-hk
what mean to allow to creat max 10 SIP phone But at the same time only 1 SIP can conv ( conv )
And how to encrease SIP phone in pbx???
 
He means you can create 10 SIP circuits on that card but only one can talk. There is 1 B channel available between all 10 circuits.

You can't increase the SIP phones (or increase/decrease anything) on a configured, finished BFDAT, you can't edit it. You can only create a new BFDAT, delete or move everything off the card, and delete and re-add the card with the new BFDAT.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top