help

[sashan]

in a PRI has the 2118516 line, I assign it to a phanton extension 3516, this extension has to ring on the extension 1241 and at the same time it can be taken for a bottom of the telephone set.

 

[chrisay59]

This makes no sense!

 

[Johnthephoneguy]

There's no question, at least not that I understand either.

JohnThePhoneGuy

"If I can't fix it, it's not broke!

 

[johnpoole]

sure it does, we both need a double then read it fast.. english may not be his 1st choice... two basic ways to get a 7 digit number to ring a station.. did (ddi) and use the idc to change the digits to the dn.. (ld 49) or auto yes and assign the dn at the atdn on the trunk.. but if you want to send that to a phantom, (why). it can not be key 0 on a physical set.. you can use an internal redirect.. maxp 1 acd ncfw to key 0.. or again the idc, change the digits you get from the provider to match the dn..

idc.. in ld 49 prt idc, then chg or add a table, then go to the rdb (ld 16) and enter idc yes, then the table number for days and/or nights

john poole
bellsouth business
columbia,sc