i have a spa3102 ata, most of the programming is straight forward and it partially works. I can make outbound calls ,which i dont need to make calls, i need inbound calls for the ringer. We have a s8300 server and g450 gateways,i have the license and everything is setup thru session manager but when i use putty and traceSM i see 408 timeout,503 service unavailable and publish 404 unauthorized. My thoughts are Response Status Code Handling under the sip tab,or dial plan might affect inbound traffic, but again im not sure and cant find any documentation.I dont understand alot of the ip side,im learning it slowly but surely. Any help or direction would be great.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Help with analog terminal adapter, spa-3102
- Thread starter Cityman13
- Start date
smokinjoe2938
Programmer
wrong forum, you want the cm forum!
Yes ,wrong forum, but also, bargain bin product.
I installed those on an IP Office for remote 911 signaling; don't use them for everyday use.
ACSS-SME
I installed those on an IP Office for remote 911 signaling; don't use them for everyday use.
ACSS-SME
- Status
Similar threads