Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Help Required on "Drill down"
- Thread starter naidu7615
- Start date
Drilling ia all about working with hierarchies as defined in Designer. BO doesn't care which tables the objects come from. It will put them in it's microcube and let you drill on them.
You should read up in the Designer manual about Hierarchies and Scope of Analysis. Then read about Drilling in the Reporter user guide.
Finally, it's not practical to ask questions on boards like this and expect to get alot of details. We'll help get you pointed in the right direction, but you generally won't get alot of detail.
Steve Krandel
Knightsbridge Solutions
formerly BASE Consulting Group
You should read up in the Designer manual about Hierarchies and Scope of Analysis. Then read about Drilling in the Reporter user guide.
Finally, it's not practical to ask questions on boards like this and expect to get alot of details. We'll help get you pointed in the right direction, but you generally won't get alot of detail.
Steve Krandel
Knightsbridge Solutions
formerly BASE Consulting Group
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question