Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
HELP!!!!!! Please why can'nt I telnet to switch
- Thread starter loveroots
- Start date
directlyconnected
Technical User
switch(config)#line vty 5 15
switch(config-line)#password blablabla
switch(config-line)#exit
switch(config)#enable password blablabla
You must set a password on the virtual terminal. If you want to telnet to the router, you must also set a password on line vty 0 4 as well. Hope this helps.
Tim---CCNA, CompTIA A+, Network+, father of 2, husband, tired, help me...
switch(config-line)#password blablabla
switch(config-line)#exit
switch(config)#enable password blablabla
You must set a password on the virtual terminal. If you want to telnet to the router, you must also set a password on line vty 0 4 as well. Hope this helps.
Tim---CCNA, CompTIA A+, Network+, father of 2, husband, tired, help me...
DanInRaleigh
Technical User
...have you figured it out yet...i'm curious
CCNP,CCSP,MCSE,Sec+,Net+,A+...
CCNP,CCSP,MCSE,Sec+,Net+,A+...
directlyconnected
Technical User
Oh---I forgot---after you set the password in line config mode, you must also incorporate the command "login".
- Status
Similar threads
- Locked
- Question
- Locked
- Question