Using analog extension port and Bogen WMT-1A to a pagepac. Was told by Bogen I need a UTI-1. Is this correct? I did hook up the WMT unit and don't get a busy, but I hear nothing through horn. Thanks!
Is the pagepac a modular connection for the input? A lot of pagepac equipment need the audio on the Green/Red and a contact closure on the Black/Yellow. If you're not using BGM, you may be able to just strap Black to Yellow
Thank you Tommy. Used a Viking RAD unit, connected analog extension port to the "phone in" and the 600ohm out to the PagePac 6. I did need to short out the black/yellow pairs to function. Then programmed a DSS button "dial ICM page" for that extension. Works like a charm! I will remember this procedure for future installs, what a relief. Once again, much appreciate ya..
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.