nickrugado
MIS
DoCmd.Requery Forms![dsh_dshbd_layout]![dsh_tab_HDMI_forSUBTABS].Form![frm_MITerms].Form![MktRent]
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Help.... look at this reference to a sub/sub form is it wrong?
- Thread starter nickrugado
- Start date
- Status
TheAceMan1
Programmer
How are ya nickrugado . . .
Assuming the code is running from the mainform, try:
[blue]Your Thoughts? . . .[/blue]
See Ya! . . . . . .
Be sure to see faq219-2884 [blue]Worthy Reading![/blue]![[thumbsup2]](/data/assets/smilies/thumbsup2.gif "[thumbsup2] [thumbsup2]")
Also faq181-2886 [blue]Worthy Reading![/blue]
Assuming the code is running from the mainform, try:
Code:
[blue][dsh_tab_HDMI_forSUBTABS].Form![frm_MITerms].Form.[purple][b]Requery[/b][/purple][/blue][blue]Your Thoughts? . . .[/blue]
See Ya! . . . . . .
Be sure to see faq219-2884 [blue]Worthy Reading![/blue]
Also faq181-2886 [blue]Worthy Reading![/blue]
- Status
Similar threads
- Locked
- Question
- Locked
- Helpful tip
- Locked
- Question
- Locked
- Question
