npmelanson
MIS
Could someone help me with the settings on how to connect to the MAPD maintenance modem. The modem is already configured but I am looking for my PC configuration.
Thank you.
Thank you.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Help Connecting to the MAPD Maintenance Modem.
- Thread starter npmelanson
- Start date
- Status
mojoputter
Technical User
Are you trying to connect through ASA, if it is a direct connect I have done it using hyper terminal, 9600,8,1 & none is the port setup.
- Thread starter
- #3
npmelanson
MIS
What about using ASA on the network to manage it once it is up? I set it to 513 for emulation and the IP port 23 and I don't get a login prompt?
Thank you again.
Thank you again.
wildcard100001
Technical User
Via IP, see if you can ping it. Usually though Avaya recommends it's own 192 network in which you would not be able to connect via your LAN network.
By modem I have 9600, 8, none, 1, Hardware
Thanks,
Wildcard
By modem I have 9600, 8, none, 1, Hardware
Thanks,
Wildcard
- Thread starter
- #6
npmelanson
MIS
Thank you again, I will try to dial into it to set the TCP/IP parameters.
- Status
Similar threads
- Locked
- Question