Historically I have had a single PIX firewall and to that I have connected a Packeteer 6500 shaping appliance. Looking ahead I am moving to dual ASA 5520 firewall appliances but still only the single Packeteer. My ASA's will be set up in active / standby mode. I could use some help in thinking through how to connected my Packeteer to the dual ASA solution. Currently my Packeteer has one set of interfaces (input and output) for my inside network and another for my DMZ network. The Packeteer sits between my core Cisco 4510 switch and my firewall. Has anyone out there worked through a similar move?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!