Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

hello im working on an opt 11 c tel

Status
Not open for further replies.

Trybo

Vendor
Joined
Sep 4, 2007
Messages
29
Location
US
hello im working on an opt 11 c telco provider changed to sip trunks i cant get calls in or make calls out on pri ive brought down dch ld then disl loop then reeabled the loop shows idle on 23 channels and the d-channel is established
any ideas
thanks for the suggestion yes the pri had to be changed too ni2

 
How are the SIP trunks coming in?. I would have thought that it was via a Signalling server. You might need to configure or reboot it.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = linkedin
 
Protocol mismatch would be my guess.
 
hello was able to get sip trunks working outed pri and put back in matching Telco the problem now is night fwd button on console when activated gives a busy signal or reorder tone but when forward same acd # from analog dcfw goes out no problem any suggestions
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top