Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hello Board

Status
Not open for further replies.

Stratagem

Technical User
Joined
Feb 16, 2004
Messages
2
Location
US
Ive been a lurker for some time and finaly joined because it looks like some people here know there stuff anyway I need some feedback for a Home Lab and eventually certification : I have 3 Cisco 2621's /3 Cisco 2900-M-XL's /2 Cisco 2611's that I want to replace/integrate into an existing home lan consisting of 1 Westell Bridge /1 Linksys BEFSR41 Router doing PPOE to my DSL ISP /1 Linksys BEFSR41W (using as WAP) /2 Dlink 5 port switches with a W2K domain controller on the LAN.

Having said that heres my dillema I already have 2 2900's online doing trunking via ISL all users are still on VLAN 1 because 2621 is offline and no VLAN routing on linksys available cannot use 2621 until I upgrade memory and load IOS 12.3(5B) current IOS is 12.2(4)T-3 I.P.

Question 1: is can I implement 2611's as HSRP routers to the 2900's with each of them plugging into my linksys
for Inet access ?

Question 2: what is max speed capability of HD60/HSSI I've read some stuff where you can simulate frame relay switch via back to back /can I do HSRP over DTE-DCE on 2611's & 2621 to 2900's via ethernet for Inet access when 2621 goes online?

I know this is a lot but based on my previous readings I know some of you guys can offer some guidance! which I really need.

All thanks in advance.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top