wolfman423
Technical User
Greetings,
I'm pretty green when it comes to ISDN, so be gentle. I have a customer that is trying to initiate an ISDN call (PRI) from a Windows RRAS server using Demand Dial interfaces. They are trying to connect to our Cisco 3725. They are able to authenticate chap but I am unable to assign them a static ip which I have set aside for them.
ip route xxx.xxx.xxx.xxx 255.255.255.255 192.168.152.84
Our 3725 is setup like an access server. I am used to receiving calls from BRI's but I'm not sure how I should setup the config on the 3725.
Thanks for your help!
I'm pretty green when it comes to ISDN, so be gentle. I have a customer that is trying to initiate an ISDN call (PRI) from a Windows RRAS server using Demand Dial interfaces. They are trying to connect to our Cisco 3725. They are able to authenticate chap but I am unable to assign them a static ip which I have set aside for them.
ip route xxx.xxx.xxx.xxx 255.255.255.255 192.168.152.84
Our 3725 is setup like an access server. I am used to receiving calls from BRI's but I'm not sure how I should setup the config on the 3725.
Thanks for your help!