Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Have a message play when an extension has been removed?

Status
Not open for further replies.

PhoneTeck

Technical User
Aug 6, 2003
263
US
Is there a way that if I remove an extension and if a caller is still calling it that a message can play that says the number is no longer in service or if an extension isn't assigned yet that the same message could play?
 
Hardware platform? Definity / CM software version?

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

37 years Bell, AT&T, Lucent, Avaya
Tier 3 for 27 years and counting
 
g3r can run Definity software g3rv1.1 up to g3rv11
These software versions evolved from the early 1990's until 2004 and have many different features
available or not available depending on what system features are turned on.

Trying to help someone without this information is like you asking someone if they can fix their car, and the information you supply them is "Ford"


With the information you supplied, the answer to your question is
"Yes"



A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

37 years Bell, AT&T, Lucent, Avaya
Tier 3 for 27 years and counting
 
Code:
In the example below 1234 could be a station or an announcement extension that supplies the caller the information you wish them to know


display system-parameters features                       Page   1 of   8   SPE B
                        FEATURE-RELATED SYSTEM PARAMETERS
                                Trunk-to-Trunk Transfer: all
Coverage Subsequent Redirection/CFWD No Answer Interval: 3
          Coverage - Caller Response Interval (seconds): 4
                        Keep Held SBA at Coverage Point? y
Automatic Callback - No Answer Timeout Interval (rings): 3
                   Call Park Timeout Interval (minutes): 10
    Off-Premises Tone Detect Timeout Interval (seconds): 25
                             AAR/ARS Dial Tone Required? y
                                     Music/Tone on Hold: music  Port: 02A1001
          Music (or Silence) on Transferred Trunk Calls? no
           [COLOR=red]            DID/Tie/ISDN Intercept Treatment: 1234[/color]


A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

37 years Bell, AT&T, Lucent, Avaya
Tier 3 for 27 years and counting
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top