Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hardware Issue with my Tapeware....

Status
Not open for further replies.

SiAdam

IS-IT--Management
Joined
Jan 19, 2005
Messages
2
Location
US
I try to do anything with my drive...and I get this error msg:

SCSI bus has unexpectantly gone to a bus free state. Either there is a target device problem, or the SCSK bus has been physically disconnected from the target.


Any ideas?

Thanks guys....
 
I got this error too. Started to use Ntbackup and everything worked fine ;)
 
Well I finally talked to Dell and told them the problem I was having...

They actually told me to disable the tape drive in device manager b/c Tapeware uses its own set of drivers or something...? I don't think they knew why, but it worked...so if anyone else has this problem...give it a shot....I never would have thought...

Good luck....
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top