Hangup to complete transfer 1

[btrain8]

I have 2 standalone offices.. 1 s8700/cm3.1 and an s8300/cm2.1

on the 3.1 site, if you get a call and hit the xfer button the display reads 'hang up to complete transfer' and on the other site it doesn't say anything; however, it works if you hang up. Is that a setting or is that a difference in CM versions?

 

[AvayaTier3]

This is a programmable system feature.
change system-parameters features Page 7 of 16
FEATURE-RELATED SYSTEM PARAMETERS

CONFERENCE/TRANSFER

Abort Transfer? y No Dial Tone Conferencing? y
Transfer Upon Hang-Up? y Select Line Appearance Conferencing? y


A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"



bsh

35 years Bell, AT&T, Lucent, Avaya
Tier 3 for 25 years and counting

 

[SF0751]

There is an entry on page 2 of the COR form - "Block Enhanced Conference/Transfer Displays?". The default setting is YES, change it to NO and you will start receiving the extra display messages for conference and transfer calls.

Susan
"An education isn't how much you have committed to memory, or even how much you know. It's being able to differentiate between what you do know and what you don't."
- Anatole France