H.323 trunk

[msk69]

We have two sites. One is CM old release 4 and other system is also CM release 8.0. Both system have have H.323 trunk. I followed the NTPs and made H.323 trunk in both systems but i am not able to dial from one system to other and vice versa, Trunks are in service at both system. Below is the trace of a station dialing other CM
01:33:11 G711MU ssff ps:20
rgn:1 [172.16.3.116]:2836
rgn:1 [172.27.1.21]:2050
01:33:11 dial 3803 route:UDP|AAR
01:33:11 term trunk-group 1 cid 0x16e
01:33:11 dial 3803 route:UDP|AAR
01:33:11 route-pattern 1 preference 1 location 1/ALL cid 0x16e
01:33:11 seize trunk-group 1 member 2 cid 0x16e
01:33:11 Calling Number & Name 6000 Avaya Test
01:33:11 Setup digits 3803
01:33:11 Calling Number & Name NO-CPNumber Avaya Test
01:33:11 Calling party not in public table
01:33:11 denial event 1190: No circ/chan avail D1=0xa023 D2=0x122
extension.

does somebody have working H.323 trunk configuration between two CM.

 

[msk69]

Problem resolves. It was signaling configuration issue at OLD CM, By setting below option to "1" it started working. Previously it was set to zero.

trunk group for channel selection=1