H.323 Phone config

[beckman68]

Can some one help with setting up a H.323 phone. What type of phone set does it have to be setup as? It's asking for the GateKeeper port, IP and also the H.323 Extension? any Help?????????

 

[bigindian65]

You know the type of IP set you are setting up right? like i2004?, port is 4100. IP info is on you or the network crew. You talking NRS/ nortel signaling server? You may want to post a little more info about what you have for someone like Acewarlock or John Poole to help you out.

 

[beckman68]

The phone is a LifeSize Conference phone, it supports H.323 & SIP. I want to try to set it up on our NRS. It is not tested on the Nortel but it has been on a Cisco and Avaya so I want to try it on ours. No confirmation that it will even work but I want to try.It's below zero here so I don't want to go outside so I figured why not. Any help would be great. Thank you.

 

[dlesap]

Get the node ip address for the gatekeeper entry.
IP might be the set ip@
H323 extension is the set extension
NRS may register the set

Give some ip infos you will get for more details

 

[dlesap]

oouups.... not the node addresse but the GK address

 

[beckman68]

Where do you setup the set extension?

 

[dlesap]

i don't know. I guess on the set itself.
I don't know that kind of stuff, that's only my suppositions based on the h323 principle

 

[Supernn]

You can try as a type i2001. This one is also used by Nortel for it's i2033