customcracka
MIS
Anyone out there running H.323 and SIP 96xx phones? I can get the phones to convert to SIP but can't get them to go back to H.323. How do you write the 96xxupgrade.txt file so it goes to either one based on the SIG value?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
H.323 and SIP 96xx phones
- Thread starter customcracka
- Start date
- Status
tommyboy23
MIS
The phone controls the SIG. The phone out of the box is set for default. If you want the phone to grab the SIP firmware you need to set the phone SIG to SIP and then you need a file called 96xxupgrade.txt which works with your 46xxsettings file. I had to modify my 96 file alittle bit.
Hope this helps.....
Hope this helps.....
- Status
Similar threads
- Locked
- Question
