Hi,<br>I have E20 server running and the console was the serial terminal. I am trying to add GXT130P card. But I am not getting the display. card is detected by the system<br>I found out this with lscfg command.<br>when I gave lsdev -Cc adapter command.<br>It shows me mg20 as defined not available<br>How to make the display adapter available.<br>I tried through smit it says lft display not found<br>There is no setting in system bios setup to change the console.<br>AIX ver 4.3.2. I hv already installed driver fo the GXT130P from th einstallation media<br><br>Please reply as soon as possible<br><br>Thanks and regards<br><br>javid
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
GXT130P card installation in E20
- Thread starter javid
- Start date
Similar threads
