Grid Disappears on sstab at Runtime!! Pls Help

[Fori]

Hi All

i have an SSTab with 4 tabs each having a MSHFlexgrid as a control array! When i'm on design mode i can c everything on each tab. If i click run on tab 2 i will only be able to c the Grid on tab 2 and the others disappear!

Do you have the faintest idea what this could be ? i tried it with other controls and the same happens! maybe its me or??

Thanks all
Nick

 

[Fori]

i also have a function which resize the form to the dessired resolution! as soon as i remove the function everything worked! how can i fix this?

Thanks
nick

 

[Glasgow]

Does the SSTab definitely contain all the grid controls - i.e. if you drag the SSTab to a new position at design time do the grid controls move with it?

 

[Fori]

yes!! but as i told you the form is being resized and thats when they are lost except the one which was worked on at desoign time!!

Thanks

 

[CCLINT]

Or, try putting the grids each on a frame of their own.
There were some bugs when a flex grid, and other controls, sat directly on a tab.

Another problem could be the way the SSTab hides controls on tabs other than the current tab, which is by setting the Left positions to -74950, or something in that range.
If you are sizing the form and it's controls when loading, then this may throw things out of whack.

Check what the Left position of the grid which should be visible.
if that looks ok, then try using a frame place on the tab and the grid placed on the frame.