Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Getwalk command

Status
Not open for further replies.
bernat

bernat

Programmer
Joined
May 13, 2007
Messages
1
Location
ES

Hello,

I'm testing some SNMP Agents and I'd like to query the agent with a GETBULK command. I've tryed it with some managers: HP-OV NNM, Castlerock, iReasoning, and others, but the fact is that i'm unable to generated this command.
Some Managers have a GETBULK button in their GUI but it doesn't generte a GETBULK PDU, instead it generates iterative GetNext commands throw a part of MIB elements.
So the question is, how to generate a GetBulk PDU?

Thanks


Bernat
 
Status
Not open for further replies.

Similar threads

Egghead2
  • Locked
  • Question Question
File Transfer Issue Using Active FTP - Port Command
Replies
1
Views
478
allworxguy
allworxguy
Pushpat
  • Locked
  • Question Question
send trap to ipnetwork through snmptrap command
Replies
0
Views
294
Pushpat
Pushpat
Pushpat
  • Locked
  • Question Question
send trap to ipnetwork through snmptrap command
Replies
0
Views
254
Pushpat
Pushpat
123viva
  • Locked
  • Question Question
how can I use the snmpwalk command with the -m option
Replies
1
Views
151
bnorton916
bnorton916
huwhamer90
  • Locked
  • Question Question
Windows command line SNMP
Replies
0
Views
77
huwhamer90
huwhamer90

Part and Inventory Search

Sponsor

Back
Top