Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
General UPS Question
- Thread starter rpearson
- Start date
For each bit of equipment calculate the VA...
Volts x amps = VA
(if the equipment only shows wattage then times the wattage by 1.4 to get the VA)
Add the VAs together and then multiply this number by 1.2.
Then purchase a UPS that is higher than this number.
Volts x amps = VA
(if the equipment only shows wattage then times the wattage by 1.4 to get the VA)
Add the VAs together and then multiply this number by 1.2.
Then purchase a UPS that is higher than this number.
- Status