I have a Pix 501 to which people connect via the Cisco VPN client. On the LAN side, the server is running DHCP, and gives the Pix LAN IP as the gateway and everything works fine.
The Pix runs DHCP only for VPN connections. When people connect to the VPN, they get assigned an IP from the Pix, AND the gateway they get assigned is the same host IP. For example:
IP Address: 192.168.1.150
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.150
The gateway should be 192.168.1.254, which is the Pix LAN IP. I cannot find where to fix this in the Pix or VPN config. Any help is greatly appreciated.
TIA
The Pix runs DHCP only for VPN connections. When people connect to the VPN, they get assigned an IP from the Pix, AND the gateway they get assigned is the same host IP. For example:
IP Address: 192.168.1.150
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.150
The gateway should be 192.168.1.254, which is the Pix LAN IP. I cannot find where to fix this in the Pix or VPN config. Any help is greatly appreciated.
TIA