G450 & SLS

[Satellite1900]

Hi,
I have to configure a media gateway 450 without S8xxx.
The Master definity is remote.The gateway should act as a backup for ip extension.The IP extension are logging on the c-lan remote, on the master definity.
The media gateway has entered into SLS service when the IP extension lose the contact whit remote server.
The Definity remote gateway sees registered, but when the network is down the phones do not register the gateway.
Someone could help me?

 

[Mitch672]

change node-names ip"

create a node-name for your G350, put in its IP address.
on each station that is at that location, on page 1, there is a place for "Survivable GK Node Name:", put that node-name in that spot. That should do it for you.

Mitch


AVAYA Certified Specialist

 

[Satellite1900]

hi,
I created the node name and I added on survivable gk node name on each station,but don't work....
Other suggestion?
Thanks...

 

[mojoputter]

Have you configured your stations in the G450 for survivability..? Do you have any trunks comiong into the G450..?

 

[Mitch672]

Did you setup SLS on the G450?

Overview (slides):

http://support.avaya.com/elmodocs2/comm_mgr/r5_1/03-603123_1_Avaya_SLS_Overview_June2008.pdf

Administration for the G450:

http://support.avaya.com/elmodocs2/comm_mgr/r5_1/03-602055_2_G450Admin_June2008.pdf

page 119 "Configuring Standard Local Survivability (SLS)"
actual data starts on page 135, the "name" field of the G450 must match the node-name/IP setup in the node-names form, also set the max survivable extensions, setup the Surv GK node name on the station form as I already advised, and set the survivable COR as well. You also need to use "PIM" or use the manual procedure on page 147 to put the data in manually.

Mitch


AVAYA Certified Specialist

 

[Satellite1900]

Following documents sls service works.
It's important to set the reset-times paerameter very low
Thanks to all.