G3V11 Terminal frooze

[AvayaHelp]

Did some work all day yesterday and forgot to log off the Terminal in the Telco room, lucky it is a secured room, anyway the screen is froozen, no input is recognized, how do I clear this issue?

Thanks

Avaya, Octel, AUDIX, CMS and other fun stuff.

"There is always a way, it may not be pretty but there is always a way."

&quot;I don't have a technical solution to your management problem.&quot; <PeaveyPhones>

P:-D

 

[wilsontec]

you can use modem dial in system and press command reset system 1 to logoff all login

 

[AvayaHelp]

Can you do this through ASA as well?

Avaya, Octel, AUDIX, CMS and other fun stuff.

&quot;There is always a way, it may not be pretty but there is always a way.&quot;

&quot;I don't have a technical solution to your management problem.&quot; <PeaveyPhones>

P:-D

 

[orypecos]

Doing a "reset system 1" is not suppose to take down ds1 trunks, but I have seen it happen. ALL OF THE T-1 IN THE WHOLE PBX WENT DOWN FOR 5 MINUTES! It was on a G3R R8 though.