Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
G1 ALARM
- Thread starter PhoneJack
- Start date
Not too familiar with G1, but below is a link to Avaya's documentation for G1.
support.avaya.com/japple/css/japple?PAGE=avaya.css.PDProductDetail&temp.groupID=107529&temp.selectedFamily=107557&temp.selectedProduct=107630
Sorry I couldn't help more.
support.avaya.com/japple/css/japple?PAGE=avaya.css.PDProductDetail&temp.groupID=107529&temp.selectedFamily=107557&temp.selectedProduct=107630
Sorry I couldn't help more.
Usually means a device on your minor or major leads on the aux cable have triggered. Perhaps a definity audix or Intuity Audix which has minor/major leads connected together.
Sometimes technicians will hook up an external device to these definity leads to monitor problems with said device and have the definity alarm and call out the condition via the switch.
Or you have shorted out the minor and/major pins on the aux cable.
Never know.
Netcon1
Sometimes technicians will hook up an external device to these definity leads to monitor problems with said device and have the definity alarm and call out the condition via the switch.
Or you have shorted out the minor and/major pins on the aux cable.
Never know.
Netcon1
- Status