Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

fujitsu series 3 shows message but no message

Status
Not open for further replies.

Refire

Technical User
Mar 4, 2003
56
0
0
US
msw light on but no message in mbx can't get light off, why?
 
Well first of all to turn off the message light
Lift the handset
Dial 1#1
Dial 0
Hangup.

This could be on because some one was messing around and sent a silent message

Hope this helps.
Mark
 
One possible reason for light on is call back modem is not shuting it off reboot the modem. That is the way an ivs works.
 
I have a Fujitsu series 3 pbx sys that does not recognise a mail box. I keep getting an error. I have the programming manuals. They offer me little help
 
Besides being able to turn Message Waiting light on, ie, Dial 1#1
Dial 0
Hangup.

In the same way, ie, from a telset, is there a way to turn it on?

Sincerely,
Kuser
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top